SocLib Components General Index

VciDma

1) Functional Description

This VCI component is both a target and an initiator.

• Addressing as a target allows to configure it for a transfer.
• Initiator will do the transfer

There is only one DMA context handled at a time

An IRQ is optionally asserted when transfer is finished.

This hardware component cheks for segmentation violation, and can be used as a default target.

This component has 4 memory-mapped registers :

• DMA_SRC

The physical address of the source buffer.

• DMA_DST

The physical address of the destination buffer.

• DMA_LEN

Length of transfer, in bytes. Writing to this register initiates the transfer, you should write to it after src and dst. This register gets back to 0 when transfer is finished.

• DMA_IRQ_ENABLED
  • Writing a non zero value enables the IRQ line (0 is disabling)
  • Reading a zero value indicates the completion of the transfer

For extensibility issues, you should access the DMA using globally-defined offsets.

You should include file soclib/dma.h from your software, it defines DMA_SRC, DMA_DST, DMA_LEN, DMA_IRQ_ENABLED.

Sample code:

#include "soclib/dma.h"

static const volatile void* dma = 0xc0000000;

void * memcpy(void *dst, const void *src, const size_t len)
{
    soclib_io_set( dma, DMA_DST, dst );
    soclib_io_set( dma, DMA_SRC, src );
    soclib_io_set( dma, DMA_LEN, len );
    while( soclib_io_get( dma, DMA_LEN ) )
        ;
    return dst;
}

(add -I/path/to/soclib/include to your compilation command-line)

2) Component definition & usage

source:trunk/soclib/soclib/module/infrastructure_component/dma_infrastructure/vci_dma/caba/metadata/vci_dma.sd​

See SoclibCc/VciParameters

Uses( 'vci_dma', **vci_parameters )

3) CABA Implementation

CABA sources

• interface : source:trunk/soclib/soclib/module/infrastructure_component/dma_infrastructure/vci_dma/caba/source/include/vci_dma.h​
• implementation : source:trunk/soclib/soclib/module/infrastructure_component/dma_infrastructure/vci_dma/caba/source/src/vci_dma.cpp​

CABA Constructor parameters

VciDma(
     sc_module_name name,   //  Component Name
     const soclib::common::IntTab & index,  // Target index
     const soclib::common::MappingTable &mt,   // MappingTable
     const size_t burst_size );   //  Number of bytes transfered in a burst

CABA Ports

• sc_in<bool> p_resetn : Global system reset
• sc_in<bool> p_clk : Global system clock
• soclib::caba::VciTarget<vci_param> p_vci_target : The VCI target port
• soclib::caba::VciInitiator<vci_param> p_vci_initiator : The VCI initiator port
• sc_out<bool> p_irq : Interrupt port

4) TLM-T implementation

The TLM-T implementation is not available yet.