Changes between Version 20 and Version 21 of Component/Vci Multi Ahci

Timestamp:

Apr 1, 2015, 6:15:24 PM (10 years ago)

Author:

alain

Comment:

--

Component/Vci Multi Ahci

@@ -106 +106 @@
 Bit-vector, one bit per command in the Command List. These bits are handled as 32 set/reset flip-flops: set by software when a command ha been posted in Command List / reset by hardware when the command is completed. A write command on this register makes a OR between the VCI WDATA field and the current value of the register. 
 
-For extensibility issues, you should access this component using these mnemonics (defined [source:trunk/soclib/soclib/module/connectivity_component/vci_multi_ahci/include/soclib/multi_ahci.h here]). 
+For extensibility issues, the software drivers must access this component using the mnemonics defined [source:trunk/soclib/soclib/module/connectivity_component/vci_multi_ahci/include/soclib/multi_ahci.h here]. 
 
 Even if there is only six registers per channel, each channel sub-segment occupies 4K bytes, and the HBA segment must be aligned on a 32 Kbytes boundary.